Construction Calculator

Construction Calculator

Estimate a preliminary construction budget from the covered area per floor, the number of floors and the cost per square foot you provide. For a material, labour and other split, use the Construction Cost Calculator.

✓ Formula, example and assumptions shown on this page

Construction Cost Estimate

Estimate a preliminary construction budget from covered area per floor, floors and cost per square foot.

Estimated Cost

Total Estimated Cost—
Area Per Floor—
Total Built-up Area—
Cost per sq ft—
Planning note: Rates vary by location, structure, materials, labour, design and finishes. For a material / labour / other split use the Construction Cost Calculator.

How the Construction Calculator Works

Enter the covered area of one floor, the cost per square foot and the number of floors. The calculator multiplies area by floors to get the total built-up area, then multiplies that by your rate.

Formula and Example

Total cost = Area per floor × Floors × Cost per sq ft. A 2,000 sq ft floor plate with 2 floors at 150 per sq ft gives 2,000 × 2 × 150 = 600,000.

What an Estimate Leaves Out

The result is only as good as the rate you enter. Actual cost depends on location, design, structure, materials, labour, soil conditions and approvals. Keep a contingency and obtain itemised local quotations before committing funds.

Frequently Asked Questions

How is construction cost estimated?

Multiply the total built-up area by a cost per square foot. This page uses the rate you enter; it does not look up prices.

What is covered area?

The area enclosed by the building on one floor. Multiply by the number of floors for total built-up area.

Does the estimate include land?

No. Land price, permits, design fees and utility connections are separate.

Where do I get a realistic rate per square foot?

Ask local contractors for itemised quotes. Rates vary by city, structure, finishes and labour.

Can I see a material and labour breakdown?

Yes, use the Construction Cost Calculator, where you set material, labour and other percentages.