Construction Calculator

Construction Cost Calculator

Estimate a preliminary construction budget from built-up area and the cost per square foot you enter. Set material, labour and other shares (they must add up to 100%) to see an amount for each.

✓ Formula, example and assumptions shown on this page

Construction Cost Breakdown

Cost Breakdown

Estimated Total Cost—
Material Cost—
Labour Cost—
Other Cost—

Enter a local rate from itemised quotes. No contingency is included.

How the Calculator Works

Enter built-up area and cost per square foot to get the total. Then split that total using material, labour and other percentages that you control.

Worked Example

2,000 sq ft at 150 per sq ft = 300,000. With 60% material, 25% labour and 15% other: 180,000, 75,000 and 45,000.

Check the Rate Basis

Before using a quoted rate, confirm whether it is per sq ft or sq m and what it includes: labour, materials, finishing, services, taxes and overhead. Do not mix rates with different scopes.

Limitations

Actual costs depend on design, soil, structure, materials, labour and approvals. This is an arithmetic estimate, not a contractor bid. Obtain itemised local quotations.

Frequently Asked Questions

How is construction cost calculated?

Total cost = built-up area × cost per square foot. Use a rate from local quotes for your specification.

What is cost per square foot?

The cost of building one square foot of covered area. It varies widely by location, structure, finishes and labour.

How much does it cost to build a house?

There is no universal figure. Enter your local rate to get an estimate.

Does it include land?

No. Land, permits, design fees and utility connections are separate.

Why must the shares add up to 100%?

Because they split a single total. If they do not sum to 100, the calculator shows an error.

Is a contingency included?

No. Add a reserve (many people keep 10–15%) on top of the estimate.