Plot Area Calculator
Enter a plot's width and length to get its area in square feet, square metres, square yards, marla, kanal, acres and hectares, plus ground coverage, open area and built-up area across floors.
Plot & Home Building Area
Enter plot dimensions, ground coverage and floors. The plot is treated as a rectangle.
Plot Dimensions
Building / Coverage
Plot Area Result
Marla and kanal sizes vary by region and housing scheme. This page assumes 1 kanal = 20 marla and uses the marla size you select.
Building Area
Total Built-Up Area
How the Plot Area Calculator Works
Enter width and length in your unit. Both are converted to feet and multiplied. The area is then converted into every other unit. Ground coverage and floors give the ground built area, open area and total built-up area.
Formulas Used
- Area (sq ft) = width (ft) × length (ft)
- Square metres = sq ft × 0.09290304
- Square yards = sq ft ÷ 9
- Acres = sq ft ÷ 43,560; hectares = sq m ÷ 10,000
- Marla = sq ft ÷ sq ft per marla; kanal = marla ÷ 20
- Total built-up = plot area × coverage % ÷ 100 × floors
Worked Example
A plot 30 ft by 60 ft is 1,800 sq ft, which is 167.23 sq m, 200 sq yd, 0.0413 acre and 0.0167 hectare. At 272.25 sq ft per marla it is 6.612 marla. With 60% coverage and 2 floors the ground built area is 1,080 sq ft, open area 720 sq ft and total built-up area 2,160 sq ft.
Common Area Conversions
| Unit | Square feet | Note |
|---|---|---|
| 1 square yard | 9 | exact |
| 1 square metre | 10.7639 | 1 ÷ 0.09290304 |
| 1 marla (traditional) | 272.25 | varies by region |
| 1 marla (some schemes) | 225 | confirm with your society |
| 1 kanal | 20 marla | 5,445 sq ft at 272.25 |
| 1 acre | 43,560 | 4,840 sq yd |
| 1 hectare | 107,639.10 | 10,000 sq m |
Marla and Kanal Assumptions
Marla and kanal sizes are not identical everywhere. Provinces, cities and housing schemes may use different values. Verify the standard in your sale deed, registry or society before relying on a figure.
Limits
The plot is treated as a perfect rectangle. For an irregular plot, split it into rectangles and add the areas. The built-up estimate assumes the same covered area on every floor.
Frequently Asked Questions
How do I calculate plot area?
For a rectangular plot, multiply width by length in the same unit. The calculator converts to feet first and then to every other unit.
How many square feet are in one marla?
It depends on the standard. 272.25 sq ft is the traditional figure used here; some housing schemes use 225 sq ft. You can choose either or enter a custom value.
How many marla are in one kanal?
This calculator assumes 20 marla = 1 kanal, which is 5,445 sq ft at 272.25 or 4,500 sq ft at 225.
How big is a 5 marla plot?
1,361.25 sq ft at 272.25 sq ft per marla, or 1,125 sq ft at 225.
How big is a 10 marla plot?
2,722.5 sq ft at 272.25, or 2,250 sq ft at 225.
How do I convert sq ft to sq m?
Multiply by 0.09290304. 1,800 sq ft × 0.09290304 = 167.23 sq m.
What happens when I change the unit?
Your width and length are converted so the plot stays the same size. 30 ft becomes 9.144 m.
Does it tell me how much I may legally build?
No. Allowed coverage, floor-area ratio, setbacks and height limits come from local regulations.